西亚试剂优势供应上万种化学试剂产品，欢迎各位新老客户咨询、选购！
中国
联系我们
联系方式：400-990-3999 / 邮箱：sales@xiyashiji.com
西亚试剂 —— 品质可靠，值得信赖
HB FULLER SEALFAS 30-36
| Flammability | 0 | |
| Toxicity | 2 | |
| Body Contact | 2 | |
| Reactivity | 0 | |
| Chronic | 2 | |
| SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 | ||
Breather coat for use over interior polyurethane and fibreglass thermal insulation on
airconditioning ducts and cold water piping. It is also used as a lagging adhesive and for
cementing laps of canvas or lagging cloth. Applied by spray or trowel.
"fire resistant paint"
Harmful: danger of serious damage to health by prolonged exposure through
inhalation.
Harmful by inhalation, in contact with skin and if swallowed.
Harmful to aquatic organisms.
Dangerous for the ozone layer.
Accidental ingestion of the material may be harmful; animal experiments indicate that ingestion of less than 150 gram may be fatal or may produce serious damage to the health of the individual. Ingestion may result in nausea, abdominal irritation, pain and vomiting. Considered an unlikely route of entry in commercial/industrial environments.
There is some evidence to suggest that this material can causeeye irritation and damage in some persons. The material may be irritating to the eye, with prolonged contact causing inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.
Skin contact with the material may be harmful; systemic effects may resultfollowing absorption. The material is not thought to be a skin irritant (as classified using animal models). Temporary discomfort, however, may result from prolonged dermal exposures. Good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.
The material is not thought to produce respiratory irritation (as classified using animal models). Nevertheless inhalation of the material, especially for prolonged periods, may produce respiratory discomfort and occasionally, distress. Inhalation of vapor is more likely at higher than normal temperatures.
Principal routes of exposure are usually by skin contact/eye contact and inhalation of vapor/spray mist. Prolonged or repeated skin contact may cause drying with cracking,irritation and possible dermatitis following. As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.
